• Pyramid Structured Abrasive PSA Film Discs on a Roll for Automotive Paint Denibbing
  • PSA Spot Sanding Film Discs for Clear Coat Defect Removal
  • OEM PSA Finishing Film Discs,Pyramid Structured Abrasive PSA Film Discs on a Roll | Aozhong
  • Pyramid Structured Abrasive PSA Film Discs on a Roll for Automotive Paint Denibbing
  • PSA Spot Sanding Film Discs for Clear Coat Defect Removal
  • OEM PSA Finishing Film Discs,Pyramid Structured Abrasive PSA Film Discs on a Roll | Aozhong

OEM PSA Finishing Film Discs

No.AZ-PSA-PYR
PSA film discs for automotive paint denibbing, clear coat spot sanding and defect removal. Disc grade, diameter, shape, roll count and OEM packing available.
Product Name
Finesse-it Film Discs
Product category
Structured abrasive film disc
Backing
Film backing
Color Options
Pink / Blue / Green / Beige / Custom
OEM Service
Supported
Attachment system
PSA pressure-sensitive adhesive
Disc diameter
Confirm according to order
Grade system
FEPA P grade, micron grade, or A-grade by specification
Disc color
Purple, gray, green, blue, gold, pink, black, or order-based color
Roll width
Based on disc diameter and row configuration
Work surface
Automotive clear coat, paint, primer, and industrial coating
  • Pyramid Structured Abrasive PSA Film Discs on a Roll for Automotive Paint Denibbing
  • PSA Spot Sanding Film Discs for Clear Coat Defect Removal
  • OEM PSA Finishing Film Discs,Pyramid Structured Abrasive PSA Film Discs on a Roll | Aozhong

Description

OEM PSA Finishing Film Discs

PSA film discs for automotive paint defect removal, clear coat denibbing, spot sanding, and pre-polishing surface preparation.

Aozhong Pyramid Structured Abrasive PSA Film Discs on a Roll are designed for spot sanding on automotive paint and clear coat.

Each disc combines a pyramid abrasive structure, film backing, pressure-sensitive adhesive, and release liner. The pre-cut discs are supplied on a roll for workstation dispensing. Round and shaped disc formats are available for paint nib removal, localized coating correction, and sanding before polishing.

The pyramid abrasive structure controls how the abrasive contacts the coating. During use, the structure wears and exposes abrasive within the resin system. This supports controlled material removal and a defined scratch pattern when the disc is used with the specified tool, pressure, speed, and sanding method.

Aozhong supplies this product to abrasive distributors, automotive refinishing suppliers, body shops, paint shops, coating lines, and volume users. Disc diameter, abrasive grade, shape, color, adhesive, quantity per roll, label, and packing can be produced according to the purchase specification.

PSA Film Spot Sanding Discs

Pre-cut pyramid abrasive discs supplied on release liner rolls for controlled coating-defect correction and workstation dispensing.

01

Pyramid Abrasive Structure

Structured abrasive zones support controlled spot sanding on coating defects.

02

Film Backing

Film construction transfers sanding pressure and supports disc stability during localized work.

03

PSA Attachment

Pressure-sensitive adhesive attaches the disc to compatible sanding blocks and spot-sanding tools.

04

Pre-Cut Disc Supply

Individual discs are pre-cut and supplied on a protective release liner roll.

05

Round or Shaped Discs

Circular and application-defined shapes can be produced according to the approved specification.

PSA
FILM PSA DISC
ROLL DISPENSING FORMAT Pre-Cut PSA Spot Sanding Discs Film backing · Release liner · Custom disc configuration
06

Workstation Roll Format

Roll construction supports organized dispensing, storage and inventory control.

07

Grade Color Identification

Product colors can distinguish grades within the approved abrasive range.

08

Custom Size and Roll Quantity

Disc dimensions, liner width and the number of discs per roll can be specified by order.

09

Manual and Tool Use

Suitable for hand sanding blocks and compatible spot-sanding tools.

10

OEM Supply Options

Label, packaging, color, shape and roll quantity can be configured for OEM programs.

ORDER CONFIGURATION Buyer-Defined Product Options
Disc Size Disc Shape Abrasive Grade Product Color Liner Width Roll Quantity Label Packaging

Applications

Controlled spot sanding for localized coating-defect correction, scratch refinement and preparation before polishing.

Application Area Typical Use Process Guidance
01
Automotive Paint Denibbing Cured clear-coat correction
  • Dust-nib removal
  • Particle removal
  • Post-paint correction
  • Post-baking correction
Used to remove dust nibs and particles from cured clear coat after painting or baking.
02
Spot Defect Removal Localized surface correction
  • Coating-bump correction
  • Inclusion removal
  • Localized paint defects
  • Small repair areas
Corrects a localized defect without sanding the complete panel, helping limit the size of the subsequent polishing area.
03
Clear Coat Leveling Defect high-point reduction
  • High-point leveling
  • Defect-edge transition
  • Localized surface flattening
  • Preparation for finer sanding
Used to level a defect high point before the scratch-refinement and polishing stages.
04
Run and Sag Correction Controlled coating repair
  • Reduced paint-run refinement
  • Sag-area leveling
  • High-spot transition
  • Repair-area preparation
Use after the main high spot has been reduced. The sanding grade and process must match the defect height and remaining clear-coat thickness.
05
Pre-Polishing Preparation Scratch-pattern refinement
  • Repair-area refinement
  • Scratch reduction
  • Compound preparation
  • Polishing preparation
Used to refine the localized repair area before compound and polishing operations.
06
Industrial Coating Correction Application-test dependent
  • Painted plastic parts
  • Furniture coatings
  • Appliance coatings
  • Industrial coated components
The abrasive should be evaluated on the target coating. Application testing is required before production use.
SPOT-CORRECTION PROCESS Controlled Defect Refinement
01 Inspect Confirm defect and coating condition
02 Level Reduce the localized high point
03 Refine Reduce the sanding scratch pattern
04 Polish Restore the required surface finish
!

Check the coating before sanding. Defect height, coating hardness, curing condition, remaining clear-coat thickness, abrasive grade and polishing process affect the final result.

Aozhong Manufacturing and Supply Support

Aozhong is an abrasive product manufacturer serving distributors, private-label customers, paint-repair suppliers and volume users.

Production Stage Manufacturing Controls Control Purpose
01
Product Configuration Abrasive and layer selection
  • Abrasive-grade configuration
  • Film-structure selection
  • Adhesive-system selection
  • Color identification
Establishes the abrasive grade, backing construction, attachment behavior and product-identification system for the application.
02
PSA Lamination Adhesive construction control
  • PSA lamination
  • Adhesive coverage inspection
  • Film and adhesive alignment
  • Release-force verification
Controls attachment to the sanding block or spot-sanding tool and separation from the release liner.
03
Disc Die Cutting Size and shape conversion
  • Disc die cutting
  • Round tooling
  • Shaped-disc tooling
  • Diameter and profile inspection
Confirms that the disc diameter, outline and cutting position match the approved drawing or control sample.
04
Roll Conversion Liner and quantity control
  • Release-liner roll converting
  • Disc-position inspection
  • Disc-count control
  • Roll-quantity verification
Supports consistent workstation dispensing, product counting, storage and inventory management.
05
Packaging and Batch Control OEM and distribution supply
  • Roll and carton packing
  • Product-label preparation
  • Private-label packaging
  • Batch identification
  • Sample approval before production
Supports batch traceability, distributor inventory, private-label programs and repeat-order comparison.
REPEAT-ORDER CONTROL

Approved Product Specification

The confirmed specification provides a reference for production, outgoing inspection and buyer incoming inspection.

01 Abrasive Grade
02 Disc Diameter
03 Disc Shape
04 Film Thickness
05 Adhesive
06 Release Force
07 Roll Count
08 Packaging
09 Inspection Requirements

FAQ

Information about application matching, product samples, batch consistency, private-label supply and abrasive-grade selection.

01 Can Aozhong match the sanding process used by our customers?

Yes. Aozhong can prepare samples according to the target disc diameter, grade, tool, coating system and required scratch pattern. Final selection should be based on tests using the customer’s clear coat and polishing process.

02 Can we receive samples before placing a volume order?

Yes. Samples can be supplied for cut-rate, scratch-pattern, adhesion, residue and polishing tests. An approved sample and signed specification can be retained as the reference for production orders.

03 How does Aozhong control repeat-order consistency?

Control items can include raw-material lot, abrasive structure, film thickness, disc dimensions, adhesive performance, release force, cut rate, scratch pattern, disc count and batch identification. Required tolerances should be stated in the purchase specification.

04 Can the product be supplied with our label and packaging?

Yes. Options include disc shape, diameter, grade color, quantity per roll, core, label, box, carton, barcode and private-label packaging.

05 How should buyers select between P grade, micron grade and A-grade?

Select by application testing rather than grade-name conversion alone. Buyers should compare defect-removal time, scratch depth, polishing time, disc life and cost per repair point under the same operating conditions.

Leave a message
Name *
Email *
Company Name
Message / Required Specification