Supplied in rolls
12-metre rolls are suitable for distribution and stock management at maintenance workstations, production lines and consumables stores.
A pre-cut ceramic abrasive roll for automotive refinishing, surface preparation and repair sanding.
Aozhong Ceramic Hook and Loop Sanding Sheet Roll, P320 combines ceramic abrasive grain, a coated abrasive backing, loop attachment, laser-cut extraction holes and kiss-cut sheet divisions in one roll format.
The supplied product is 70 mm wide and 12 m long. Each section can be removed along the kiss-cut line and attached to a matching sanding block, file board or rectangular orbital sander.
The P320 grit is used for primer sanding, paint preparation, defect leveling, feather edging and intermediate surface refinement. The multi-hole layout provides extraction paths across the sheet when connected to a compatible dust extraction system.
Aozhong manufactures abrasive products for distributors, converters, automotive refinishing suppliers and volume users. Grit, roll width, roll length, sheet length, hole pattern, backing and packaging can be configured for the buyer’s application.
12-metre rolls are suitable for distribution and stock management at maintenance workstations, production lines and consumables stores.
Horizontal pre-cut lines allow pieces to be cut to the required length, reducing the need for on-site measurement and cutting.
Can be fitted to compatible hook-and-loop hand sanding pads, strip-shaped backing plates or rectangular sanding machine backing plates.
The V-shaped perforated array works in conjunction with a dust collection base plate to channel dust into the dust extraction system.
Ceramic abrasives form new cutting edges as the grains fracture; however, the actual cutting performance and service life depend on the abrasive formulation, substrate and grinding conditions.
Aozhong supplies coated abrasive products for distributor programs and volume sanding operations. Production and converting options for this ceramic sanding roll include:
For repeat orders, the approved specification can identify:
Buyers can request a sample for tool-fit and application testing. The sample specification should include grit, width, sheet pitch, hole pattern and loop-backing type. Bulk production should follow the approved sample and purchase specification.
Repeat orders can be controlled through an approved specification covering abrasive mineral, P-grade, dimensions, hole layout, kiss-cut pitch, backing and packaging. Incoming materials, converting dimensions and finished rolls are checked by batch.
Provide the backing-pad dimensions, hole-layout drawing, attachment type and tool model information. Aozhong can compare these requirements with the roll width, sheet pitch and hole pattern before order confirmation. A physical fit test is recommended for a new tool system.
The shown product should be specified for dry sanding unless its backing, bond and lamination have been approved for wet use. Buyers requiring wet sanding should state this condition during technical confirmation.
Packaging, labels, product codes, roll length and carton quantity can be configured for distributor programs. Artwork, legal markings, barcode requirements and package structure should be approved before production.