• Hook and loop foam-backed floor sanding pads in blue gray and green
  • Floor sanding pad for commercial floor scrubber and surface preparation
  • Hook and loop foam-backed floor sanding pads in blue gray and green
  • Floor sanding pad for commercial floor scrubber and surface preparation

Hook and Loop Foam-Backed Floor Sanding Pad

No.AZ-FSP-OEM
Foam-backed floor sanding pad for concrete, epoxy, terrazzo and coated-floor maintenance. Diameter, center hole, abrasive grade and OEM packaging can be configured.
Product Name
Hook and Loop Foam-Backed Floor Sanding Pad
Product Type
Machine floor sanding pad
Use method
Machine sanding, cleaning or surface preparation
Attachment
Hook and loop
Abrasive grain
Confirm by application and order
Available Diameters
13 inch, 14 inch, 15 inch, 16 inch, 17 inch, 18 inch, 20 inch, 21 inch, 22 inch, 24 inch, custom
Shape
Circular
Working surface
Abrasive fiber or fabric surface
Wet or dry use
Confirm by product specification
Compatible equipment
Single-disc machine, floor scrubber, orbital floor machine or floor grinder
Customization
Diameter, center hole, grit, foam, color, backing, label and packaging
Target surfaces
Concrete, epoxy, terrazzo, stone and coated floors after testing
  • Hook and loop foam-backed floor sanding pads in blue gray and green
  • Floor sanding pad for commercial floor scrubber and surface preparation

Description

Hook and Loop Foam-Backed Floor Sanding Pad

Floor Cleaning, Sanding and Surface Preparation

The Hook and Loop Foam-Backed Floor Sanding Pad is a machine-use abrasive pad for industrial floor maintenance, commercial floor cleaning, coating preparation and floor refinishing.

The product uses a circular shape with a center hole and an abrasive working surface. Depending on the ordered construction, a foam layer supports pressure distribution and surface contact, while a hook and loop backing connects the pad to a compatible machine drive plate.

Blue, gray and green options are available for SKU identification. Color does not represent a universal floor-pad grade. Abrasive type, grit, floor application and machine compatibility must be stated in the purchase specification.

Aozhong manufactures abrasive and surface-finishing products for distributors, importers, floor-care suppliers, cleaning contractors and industrial users. Diameter, center hole, grit, foam thickness, backing and packaging can be configured according to the target machine and floor system.

Product Features

A foam-backed abrasive pad with hook-and-loop attachment and center-hole alignment for floor cleaning, surface preparation and finish adjustment.

01
PRESSURE DISTRIBUTION

Foam-Backed Contact

The foam layer supports contact across floors with joints, texture or minor height variation.

Foam density and thickness affect pressure distribution, machine stability and sanding response.
02
DRIVE-PLATE CONNECTION

Hook and Loop Attachment

The loop backing attaches to a compatible hook-face drive plate. It supports pad replacement between cleaning, sanding and finishing stages.

FOAM-BACKED FLOOR PAD HOOK & LOOP
COLOR OPTIONS Blue · Gray · Green
03
INSTALLATION AND ALIGNMENT

Center-Hole Design

The center hole supports installation and alignment. Hole diameter and position must match the machine or drive plate.

04
ABRASIVE FUNCTION

Abrasive Working Surface

  • Soil removal
  • Coating preparation
  • Surface keying
  • Scratch refinement
  • Floor restoration
  • Finish adjustment
Select the working grade according to the floor material and process stage.
FLOOR PAD APPLICATION GUIDE

Applications

Select the pad grade according to the floor material, surface condition, maintenance task and machine process.

Application Area Typical Applications Use Guidance
01 Industrial Floor Maintenance
  • Attached-soil removal
  • Tire-mark treatment
  • Surface cleaning
  • Coating preparation
  • Surface-key formation
  • Floor-maintenance programs
Used in factories, warehouses and production facilities. Loose metal chips, sand and hard debris must be removed before machine operation.
02 Commercial Floor Cleaning
  • Shopping centers
  • Hotels and offices
  • Schools and hospitals
  • Stations
  • Supermarkets
  • Exhibition areas
The selected abrasive grade must match the cleaning task. A sanding grade can damage a floor intended only for maintenance cleaning.
03 Epoxy Floor Preparation
  • Cleaning epoxy surfaces
  • Refinishing preparation
  • Surface keying before recoating
  • Gloss adjustment
  • Local transition work
  • Surface-contamination removal
Cracked, delaminated or loose epoxy requires repair before sanding.
04 Concrete and Terrazzo
  • Surface cleaning
  • Refinishing preparation
  • Scratch refinement
  • Surface-texture adjustment
  • Transition between sanding steps
Coating removal, laitance removal and high-point correction require a grade selected for stock removal.
05 Stone Floors
  • Marble
  • Granite
  • Engineered stone
  • Cement-based stone
  • Terrazzo
Material testing is required. Stone hardness and chemical sensitivity vary, and cleaning chemicals must be checked for compatibility with the floor.
06 Coated Wood and Resilient Flooring
  • Coated wood floors
  • Vinyl floors
  • PVC floors
  • Rubber floors
  • Waxed floors
Use only when the pad grade and machine process are approved. An abrasive grade can remove the finish or change the floor texture. Test an inconspicuous area before use.
!

Application testing is required. Confirm the floor material, pad grade, machine speed, pressure and cleaning chemistry before processing the complete floor area.

MANUFACTURING & B2B SUPPLY

Aozhong Manufacturing and Supply Support

Aozhong manufactures abrasive products for distributors, importers, cleaning-supply channels, floor contractors and industrial users.

Production Stage Control Items Supply Purpose
01 Material Configuration
  • Abrasive-material selection
  • Fiber or fabric converting
  • Abrasive coating
Establishes the abrasive structure and working grade according to the floor material, maintenance process and required surface result.
02 Lamination and Attachment
  • Foam lamination
  • Hook and loop application
  • Backing-adhesion inspection
Controls foam response, layer bonding and attachment to a compatible hook-face drive plate.
03 Disc Conversion
  • Disc die cutting
  • Center-hole cutting
  • Diameter inspection
  • Thickness inspection
Confirms that the pad dimensions and center-hole position match the approved machine or drive-plate specification.
04 Identification and Packaging
  • Product labeling
  • Barcode preparation
  • Carton marking
  • Private-label packaging
Supports distributor inventory, product identification, order tracking and private-label floor-care programs.
05 Batch and Repeat-Order Control
  • Batch control
  • Approved control sample
  • Specification comparison
  • Repeat-order inspection
Supports comparison of product dimensions, construction, attachment and floor performance between production batches.
REPEAT-ORDER CONTROL

Approved Control Sample

For repeat orders, buyers can approve a control sample covering diameter, center hole, thickness, foam response, abrasive grade, attachment and floor result.

Diameter Center Hole Thickness Foam Response Abrasive Grade Attachment Floor Result
FREQUENTLY ASKED QUESTIONS

FAQ

Information about samples, repeat orders, custom dimensions, color identification and wet-use compatibility.

01 Can Aozhong provide samples for machine testing?

Yes. Samples can be prepared for drive-plate fit, center-hole matching, wet or dry testing, sanding-rate evaluation and floor-finish inspection. The buyer should provide the machine and floor specifications.

02 How does Aozhong control repeat-order consistency?

Repeat orders can be managed through an approved sample and specification covering diameter, center hole, thickness, foam density, abrasive grade, backing attachment and packaging. Production inspection can include dimensional, lamination and performance checks.

03 Can the pad diameter and center hole be customized?

Yes. Diameter and center-hole configuration can be produced according to a drawing, machine specification or approved sample. The attachment surface and working direction must also be confirmed.

04 Do blue, gray and green represent standard grit grades?

No. These colors are not universal abrasive grades. The purchase order should state the abrasive type, grit or application grade for each color.

05 Can the pad be used with water and cleaning chemicals?

Only when the selected resin bond, foam, lamination and backing are specified for wet use. Chemical compatibility and machine approval should be checked before volume application.

Leave a message
Name *
Email *
Company Name
Message / Required Specification