Aozhong 30 × 90 mm Green and Yellow Hook and Loop Sanding Sheets are replacement abrasives for compatible hand sanding blocks. Each sheet measures 30 mm wide and 90 mm long. The white loop backing attaches to the tool’s hook surface, allowing sheet replacement between sanding stages.
Aozhong manufactures the series for distributors and volume users. Grit, abrasive, backing, dimensions, color, logo and material configuration can be customized around the workpiece, tool and required finish.
The 30 × 90 mm format reduces cutting at the workstation. Buyers can specify tolerances around the working face of their sanding tool.
The loop-backed sanding sheets can be removed when worn or when changing grit. The attachment system does not require pressure-sensitive adhesive on the tool.
The tool base supports the abrasive during sanding. Base flatness and hardness influence pressure distribution, leveling and edge control.
Application schematic · Tool and sheet quantity shown for illustration.
The strip format suits small work areas, narrow faces and repair zones where the complete tool can reach.
Sanding block refill sheets allow customers to replenish abrasives separately from the tool. Pack contents can be defined by grit and quantity.
| Workpiece or Process | Typical Tasks | Selection Requirement |
|---|---|---|
| Wood | Small-part preparation, edge refinement and repair sanding | Match abrasive and grit to the wood and finish |
| Resin and models | Seam removal, filler leveling and scratch refinement | Protect molded details, corners and thin sections |
| Plastic | Local surface correction and coating preparation | Control pressure and heat |
| Fillers and coatings | Repair-area refinement, primer preparation and edge transitions | Follow the coating system’s grit instructions |
| Metal components | Local surface preparation and scratch refinement | Confirm abrasive compatibility and contamination controls |
Wood sanding sheets, resin sanding sheets and plastic sanding sheets may require different abrasive and backing configurations, even when their dimensions are identical.
For panel leveling or large-area contour correction, select a supporting tool appropriate to that task.
Aozhong supports grit and abrasive selection around the customer’s material and sanding stage.
The carrier backing and material construction can be specified according to support, bending and operating requirements.
The standard format is 30 × 90 mm. Other dimensions can be reviewed against the customer’s tool and working area.
Color and logo customization support distributor product ranges. Grit and product identification should remain clear throughout storage and use.
For buyers seeking an OEM sanding sheet manufacturer, Aozhong offers production configuration around agreed materials, dimensions, grit and branding.
Wholesale sanding sheets and private label sanding sheets should be ordered against a defined specification, with each grit and pack quantity identified separately.
Aozhong manufactures abrasive products for distributors and volume users. Customization includes grit, abrasive, backing, dimensions, color, logo and material configuration.
Not by themselves. The relationship between color, abrasive, backing and grit must be defined in the product specification. Color is not an international performance classification.
Provide the tool’s working-face dimensions and hook-surface details, or arrange evaluation with a tool sample. Check sheet coverage, attachment, sliding, edge lifting and removal.
Test the intended abrasive, backing and grit on the production workpiece. Record cutting behavior, scratch pattern, loading, grain retention and tool attachment before approving the configuration.
Approve a specification and reference sample covering materials, grit, dimensions, attachment, identification and pack quantity. Agree on acceptance criteria before production and use the same test method for repeat-order comparisons.