The Aozhong 9-Inch P40 PSA Sanding Disc Roll provides sanding discs in a linked roll format for stock removal, stripping, and preparation prior to subsequent sanding. Each disc detaches from the roll and attaches to a matching backing pad via pressure-sensitive adhesive.
Aozhong manufactures PSA sanding disc rolls for distributors and production buyers. The abrasive type, diameter, grit size, and number of discs per roll can be customized to meet equipment requirements, workpiece materials, and purchase quantities.
The linked format keeps discs together for storage and individual dispensing. Confirm that separation leaves the disc edge intact.
The adhesive backing connects directly to a matching PSA backing pad. Center the disc and press it into contact according to the product instructions.
The P40 configuration addresses the removal stage before subsequent sanding or finishing operations.
Supply-format schematic · Color, disc quantity and connection details follow the approved specification.
Discs per roll can be specified around distributor pack requirements and production consumption.
Buyers can specify abrasive, diameter and grit according to the workpiece and equipment.
P40 sanding discs are used in the material removal stage. Follow with subsequent grit steps where the process requires scratch refinement.
| Application | Purpose | Selection Requirement |
|---|---|---|
| Wood sanding | Remove machining marks and adjust stock | Wood species, removal requirement and sanding sequence |
| Coating removal | Strip coatings before further preparation | Coating condition and loading behavior |
| Filler shaping | Shape cured repair filler | Filler specification, cure condition and pad support |
| Metal surface preparation | Address rust, oxidation or previous grinding marks | Metal type, abrasive selection and permitted scratch depth |
| Composite repair | Shape repair areas and remove excess material | Composite structure, abrasive configuration and equipment |
Application suitability depends on the abrasive, backing, adhesive and machine combination. Disc diameter alone does not establish equipment compatibility.
The abrasive working layer consists of grain held to a backing by a binder. The PSA layer connects the disc to a backing pad designed for adhesive-backed sanding discs.
Discs are supplied in a linked roll for individual dispensing.
Aozhong combines sanding disc manufacturing with abrasive selection, dimensional customization and roll quantity configuration. Distributors can define a product range by diameter, grit and pack quantity. Production buyers can establish specifications around their sanding process.
For order confirmation, record:
Yes. Aozhong manufactures this product and offers abrasive, size, grit and quantity customization for distributors and production purchasing.
These must be confirmed for the configuration being ordered. The P40 marking identifies grit; it does not identify the mineral or backing.
Provide the required disc diameter, backing pad details, machine model, operating speed and extraction arrangement. Confirm these against the disc specification before ordering.
Test it on the intended backing pad under the sanding conditions. Check disc movement, edge lifting, removal, residue and backing damage against agreed acceptance criteria.
Provide diameter, grit, workpiece material, application, abrasive requirements, discs per roll and purchase quantity. Include equipment details and a reference sample where available.