The Aozhong 50 × 2100 mm Cloth Sanding Belt is an endless abrasive belt comprising an abrasive working face, cloth backing and belt joint. It runs on equipment accepting the specified belt dimensions and construction.
Aozhong manufactures abrasive products for distributors and industrial volume buyers. Grit, dimensions, color, logo and joint can be customized around equipment requirements, finishing operations and distributor product ranges.
This cloth-backed abrasive belt can be evaluated for material removal, edge refinement, scratch blending and surface preparation. Application suitability depends on the abrasive, grit, backing, joint and operating conditions confirmed for the order.
Configure the belt around material removal, incoming scratches and the following operation.
Specify width and loop length to match equipment requirements.
Select the splice around the backing, wheel arrangement, contact method and finish requirements.
Construction schematic · Color and joint details follow the approved specification.
Provides the carrier for the abrasive layer and transmits tension during operation.
Supports product identification across distributor ranges.
Supports customer branding and private label sanding belts.
| Application Area | Operations for Evaluation | Selection Factors |
|---|---|---|
| Metal fabrication | Deburring, edge refinement and surface grinding | Abrasive, grit, removal requirement and heat |
| Stainless steel components | Scratch refinement and preparation before polishing | Surface appearance, contamination control and finish |
| Steel hardware | Surface repair and localized oxide removal | Workpiece hardness and processing time |
| Wood components | Shaping, edge sanding and preparation before coating | Wood type, loading and scratch pattern |
| Non-ferrous metal components | Deburring and surface refinement | Chip adhesion and scratching |
| Plastic or resin components | Edge and surface treatment | Heat, loading and dimensional control |
These applications are selection directions. Confirm the belt configuration on the intended workpiece before volume use.
The abrasive layer performs the cutting action. The bond holds the abrasive on the cloth backing, while the backing carries tension and bends around the machine wheels.
The joint connects the belt ends. Its construction must account for the backing, wheel diameter, operating conditions and contact arrangement. Joint thickness variation can affect vibration and surface marks.
Confirm the supplied splice construction rather than identifying it by tape color alone. Joint customization does not automatically establish suitability for reverse running or wet grinding.
Aozhong’s abrasive belt manufacturing offer combines grit, dimension and joint customization with color and logo options. Distributors can specify product variants for their customer base, while industrial buyers can define belts around an existing machine and process.
| Production Configuration | Information Required from the Buyer |
|---|---|
| Grit | Current grade, workpiece material and target result |
| Dimensions | Width, loop length, tolerances and measurement requirements |
| Joint | Machine information, wheel arrangement, contact method and operating conditions |
| Color | Color reference and identification requirements |
| Logo | Artwork, marking position and identification requirements |
For repeat purchasing, establish an order specification covering the abrasive, grit system, backing, joint, dimensions and marking. Define acceptance criteria against the approved sample before production.
Provide the belt width, loop length, machine model, tensioning range and wheel arrangement. The 50 × 2100 mm size identifies width and circumference. Compatibility also depends on the backing, joint and operating requirements.
Yes. Joint customization is available. Submit machine and application information so the splice can be confirmed. Available constructions and running direction are agreed for the ordered configuration.
Test it on the intended workpiece using recorded settings. Agree on surface appearance, processing time, belt consumption and joint performance. Record the approved configuration as the purchasing reference.
Include the abrasive, grit, backing, dimensions, joint and marking in the order specification. Agree on tolerances, inspection requirements and change notification before production.
Yes. Logo and color customization are available alongside grit, dimensions and joint options. Provide artwork and specification requirements for confirmation. Order quantity and delivery schedule are confirmed during quotation.