• Aozhong 115 mm Fine Non-Woven Conditioning Disc
  • Aozhong 115 mm Non-Woven Blending Disc,Aozhong 115 mm Non-Woven Blending Disc
  • Aozhong 115 mm Non-Woven Blending Disc,Aozhong 115 mm Non-Woven Blending Disc
  • Aozhong 115 mm Non-Woven Blending Disc,Aozhong 115 mm Non-Woven Blending Disc
  • Aozhong 115 mm Fine Non-Woven Conditioning Disc
  • Aozhong 115 mm Non-Woven Blending Disc,Aozhong 115 mm Non-Woven Blending Disc
  • Aozhong 115 mm Non-Woven Blending Disc,Aozhong 115 mm Non-Woven Blending Disc
  • Aozhong 115 mm Non-Woven Blending Disc,Aozhong 115 mm Non-Woven Blending Disc

Aozhong 115 mm Non-Woven Blending Disc

No.AZ-NWD-115-ID50-H22.23-F-15
Aozhong 115 mm Fine non-woven surface conditioning disc with backing plate, 22.23 mm bore and 15 mm abrasive layer. Grade, color, logo and bore customization.
Product name
115 mm Fine Non-Woven Surface Conditioning Disc
Product category
Non-woven abrasive disc
Outside diameter
115 mm
Abrasive ring inside diameter
50 mm
Centre mounting bore
22.23 mm
Abrasive grade
Fine
Abrasive layer thickness
15 mm
Overall thickness
15 mm refers only to the abrasive layer
Customization
Grade, color, logo and mounting bore
  • Aozhong 115 mm Fine Non-Woven Conditioning Disc
  • Aozhong 115 mm Non-Woven Blending Disc,Aozhong 115 mm Non-Woven Blending Disc
  • Aozhong 115 mm Non-Woven Blending Disc,Aozhong 115 mm Non-Woven Blending Disc
  • Aozhong 115 mm Non-Woven Blending Disc,Aozhong 115 mm Non-Woven Blending Disc

Description

Aozhong 115 mm Fine Non-Woven Surface Conditioning Disc with Backing Plate

The Aozhong 115 mm Fine Non-Woven Surface Conditioning Disc with Backing Plate combines a non-woven abrasive ring, backing plate and centre mounting assembly. It is intended for metal cleaning, scratch blending, surface refinement and preparation before subsequent finishing operations.

The disc has a 115 mm outside diameter, 50 mm abrasive ring inside diameter and 22.23 mm mounting bore. The abrasive layer is 15 mm thick and supplied in Fine grade.

Aozhong manufactures abrasive products for distributors and industrial volume buyers. Grade, color, logo and mounting bore can be customized to support distributor product ranges and equipment requirements.

Product Advantages

Fine-Grade Configuration

Provides a defined starting point for evaluating scratch blending, cleaning and finishing operations.

1.5 mm Abrasive Layer

Establishes the working-layer thickness for specification and purchasing control.

Backing Plate Construction

Supports the abrasive ring and transfers drive from the mounting assembly.

Defined Mounting Dimensions

Separates the 50 mm abrasive ring opening from the 22.23 mm mounting bore.

50 mm ring opening 22.23 mm mounting bore
Fine Grade 15 mm Abrasive Layer Backing Plate

Exploded schematic · Not to scale. Color and construction follow the approved specification.

Grade Customization

Supports selection around the incoming surface and subsequent operation.

Color and Logo Customization

Supports distributor identification and private label abrasive discs.

Mounting Bore Customization

Allows configuration around equipment requirements, subject to fit and operating validation.

Applications

Application Processing Objective Evaluation Criteria
Metal cleaning Removal of surface deposits, rust or oxidation Cleaning result and base-material removal
Scratch blending Refinement of marks from preceding operations Remaining scratches and appearance
Satin finishing Adjustment of metal texture and reflectivity Finish sample and texture direction
Deburring Treatment of burrs within the disc’s processing capability Burr removal and edge rounding
Pre-polishing Preparation of the surface for subsequent polishing Polishing time and remaining marks
Surface preparation Cleaning or texture adjustment before coating Requirements of the coating process

These are application directions. Confirm suitability using the intended workpiece, machine and operating conditions.

A rotating disc may leave curved or overlapping scratch patterns. A requirement for straight-line grain needs a matching process and appearance reference.

Construction and Grade Selection

The non-woven working layer carries abrasive within a fibre structure. The backing plate supports the ring, while the centre assembly provides the mounting interface.

Fine identifies the specified abrasive grade. It does not establish the abrasive mineral, a universal sandpaper grit equivalent or a guaranteed surface roughness.

Select the configuration against the workpiece material, incoming scratches, removal allowance and target finish. Where roughness is an acceptance requirement, agree on the measurement method and direction.

Aozhong Manufacturing and Customization

Aozhong’s manufacturing offer combines grade selection with color, logo and mounting bore customization. Distributors can define product variants for their customer base, while industrial buyers can specify a configuration around an existing process.

Customization Buyer Information
Grade Workpiece material, incoming surface and target result
Color Color reference and identification requirements
Logo Artwork, marking position and required content
Mounting bore Bore dimensions, tolerances and mounting-system information

For repeat purchasing, establish a specification covering materials, grade, dimensions, backing plate, mounting assembly and marking. Agree on acceptance criteria against the approved sample before production.

Frequently Asked Questions

How can we confirm that the disc fits our equipment?

Check the 115 mm outside diameter, 22.23 mm bore, mounting faces and clamping arrangement against the equipment requirements. Bore size alone does not establish compatibility. Confirm the disc’s speed rating before use.

Does 15 mm describe the complete disc thickness?

No. It describes the non-woven abrasive layer. Overall thickness includes the backing and mounting structure and must be specified separately where required.

Does Fine grade equal a particular sandpaper grit?

Fine should be assessed using the product’s grade definition and an approved sample. Do not assume a universal P-grit equivalent. Confirm the finishing result on the intended workpiece.

How should we approve samples and control repeat orders?

Record the approved material configuration, grade, dimensions and mounting details. Agree on inspection criteria and application results, including finish, processing time and attachment performance. Reference these requirements in repeat orders.

Can Aozhong supply this disc under our brand?

Yes. Logo and color customization are available, together with grade and mounting bore options. Submit artwork and specification requirements for confirmation. Available configurations, order quantity and delivery schedule are confirmed during quotation.

Leave a message
Name *
Email *
Company Name
Message / Required Specification