Aozhong Aluminum Oxide Non-Woven Surface Conditioning Belt combines an aluminum oxide abrasive working layer with a backing and belt joint. It is used for metal finishing, surface blending, rust removal and preparation before polishing.
Aozhong manufactures non-woven abrasive belts for distributors and manufacturers purchasing for production use. Material and belt length customization allows buyers to specify the belt around their equipment, workpiece and finishing process.
Provides space for abrasive contact and displacement of grinding debris.
The working layer can deform under pressure to follow the contact area. Backing, tension and contact wheel configuration also influence conformity.
Supports brushing, scratch blending and surface cleaning within the production sequence.
Construction schematic · Color and configuration follow the approved specification.
Carries operating tension while supporting the abrasive working layer.
Allows the loop circumference to be specified for the machine.
Allows buyers to discuss the working layer and backing requirements against the intended process.
| Process | Purpose | Selection Consideration |
|---|---|---|
| Metal surface finishing | Adjust surface texture before the next operation | Workpiece material and finish requirement |
| Stainless steel brushing | Produce or restore a directional finish | Grade, feed direction and contact arrangement |
| Surface blending | Blend marks left by previous machining or grinding | Scratch depth and starting surface |
| Rust removal | Remove surface rust and oxidation | Rust condition and removal requirement |
| Edge finishing | Address burrs and edge irregularities | Burr size and permitted edge change |
| Preparation before polishing | Refine the surface for subsequent polishing | Previous abrasive sequence and polishing process |
A stainless steel finishing belt should be evaluated on the customer’s workpiece. Appearance, roughness and processing time depend on the belt configuration and operating conditions.
Aozhong’s manufacturing offering combines non-woven abrasive belt production with material and length customization. Distributors can define specifications around the equipment and applications they serve. Production buyers can define the belt around their workpiece and finishing requirement.
For quotation and order confirmation, specify:
For repeat purchases, retain the specification and reference finish used during sample evaluation.
Yes. Aozhong manufactures this product and offers material and belt length customization. The quotation should identify the configuration being supplied.
Provide the workpiece material, starting surface and finishing requirement. Use sample processing to confirm cutting behavior and appearance. Select by specification and test result rather than color.
Provide the machine requirements, including width, circumference, thickness allowance, wheel diameter, tensioning arrangement and operating speed. Confirm the backing and joint configuration before ordering.
Wet grinding requires confirmation of the working layer, backing, bond and joint, together with the machine and processing liquid. Do not assume wet-use suitability from the non-woven construction.
Confirm dimensions, grade, backing, joint and operating conditions. Evaluate sample finish, processing time, tracking and joint behavior on the intended equipment, then record the acceptance requirements.