Aluminum Oxide Abrasive
Supports surface-conditioning processes.
The 7447-Type Maroon Non-Woven Abrasive Hand Pad is a surface conditioning product for metal finishing, grain blending, rust removal, cleaning, scuffing, and coating preparation.
The pad combines aluminum oxide abrasive, synthetic fiber, and resin in an open-web structure. It conforms to flat surfaces, edges, tubes, profiles, and contours. The material can be used by hand, with a hand block, or converted into discs, strips, hook-and-loop pads, and foam-backed pads.
AoZhong manufactures non-woven abrasive products for distributors, converters, metalworking plants, and volume buyers. Size, thickness, density, cutting grade, printing, converted shape, and packaging can be specified for each order.
Supports surface-conditioning processes.
Provides contact across flat and contoured surfaces.
Retains the abrasive within the fiber structure.
Provides space for swarf and sanding residue.
Supports grade identification within the product range.
Supports manual surface preparation.
Follows edges, tubes, profiles, and difficult-to-reach areas.
Supports finish blending on stainless steel and aluminum.
Removes light rust, oxidation, dirt, and coating residue.
Prepares surfaces before primer, paint, adhesive, or coating.
Can be produced as sheets, strips, discs, and die-cut parts.
Hook-and-loop and foam-backed structures are available by order.
Printed identification and private-label packaging are available according to the approved order specification.
The 7447-Type Maroon Non-Woven Abrasive Hand Pad uses a three-dimensional abrasive structure.
Forms the pad body and supports bending, compression, and contour contact.
Produces the cutting action required for cleaning, scuffing, blending, and surface preparation.
Attaches the abrasive grain to the fiber intersections.
Hold rust, paint residue, oxide, and metal swarf during use.
Connects converted discs to hook-face holders or backing pads.
| Application Area | Typical Applications | Usage Guidance |
|---|---|---|
|
01
Stainless Steel Finishing Blending and directional finish
|
|
For a directional brushed finish, move the pad in one direction and control pressure, stroke length, overlap, and replacement interval.
|
|
02
Rust and Oxide Removal Cleaning and maintenance
|
|
This pad is intended for surface rust and oxide removal. Scale, weld slag, weld stock, and corrosion pits require another abrasive process.
|
|
03
Coating Preparation Scuffing and adhesion preparation
|
|
Confirm that the selected pad grade produces the required texture without excessive coating removal.
|
|
04
Aluminum and Non-Ferrous Metal Cleaning and surface scuffing
|
|
Complete an application test to confirm the scratch pattern and control the risk of unwanted surface contamination.
|
|
05
Workshop and Maintenance Use Cleaning and light edge work
|
|
Application testing is required before use on a finished, plated, anodized, or coated surface.
|
The fiber network leaves space for swarf, rust, paint residue, and cleaning liquid. This structure reduces the concentration of debris on the contact surface.
The pad can be folded, rolled, or compressed for use on tubes, edges, grooves, corners, and contoured workpieces.
The fiber structure distributes contact over the workpiece and supports blending without the backing marks associated with abrasive paper.
The pad can create or restore a grain pattern on stainless steel and aluminum. The final pattern depends on pad grade, material, pressure, stroke direction, overlap, and use time.
The non-woven abrasive material can be converted according to the required manual or machine process.
AoZhong manufactures non-woven abrasive hand pads and converted surface conditioning products through the following process controls.
| Production Stage | Control Items | Control Focus |
|---|---|---|
|
01
Incoming Material Control Fiber, grain and resin
|
|
Verifies the synthetic fiber, abrasive grain, and resin before web formation and abrasive application.
|
|
02
Web and Bonding Control Non-woven abrasive production
|
|
Controls the three-dimensional fiber structure, abrasive distribution, resin application, and curing process.
|
|
03
Physical Property Control Density, thickness and recovery
|
|
Checks pad density, finished thickness, compression response, and recovery against the approved specification.
|
|
04
Cutting and Product Inspection Dimensions and surface condition
|
|
Verifies converted dimensions, pad appearance, abrasive and fiber shedding, and any specified backing construction.
|
|
05
Identification and Packaging Batch and shipment control
|
|
Supports product identification, batch traceability, packaging verification, and comparison with retained production samples.
|
Information about AoZhong manufacturing, batch consistency, sample testing, converted formats and quotation requirements.
Yes. AoZhong controls fiber-web formation, abrasive application, resin curing, cutting, conversion, inspection, printing, and packaging. Buyers can request samples and order specifications before volume production.
Each order is produced against an approved specification covering material, abrasive grain, color, density, thickness, dimensions, grade, printing, and packaging. Batch codes and retained samples support production-lot comparison.
Yes. Samples can be supplied for cut-rate, rust-removal, grain-blending, scratch-pattern, folding, shedding, and service-life tests. Testing should be completed on the buyer’s material and production process.
Yes. The non-woven material can be converted into round discs, hook-and-loop discs, foam-backed pads, strips, sheets, and die-cut shapes. Diameter, backing, interface layer, and packaging must be confirmed before production.
Provide the product grade, size, thickness, density or approved sample, quantity, converted format, backing type, printing, packaging, destination market, and target application. A workpiece sample or surface-finish reference can support product selection.