The Aozhong 50 × 2100 mm Pyramid Structured Abrasive Belt is a cloth-backed sanding belt for metal finishing, scratch refinement and surface preparation before polishing. Its working face features an array of pyramid-shaped abrasive structures.
Aozhong manufactures abrasive products for distributors and industrial volume buyers. Grit, dimensions, color and logo can be customized for customer product lines and equipment requirements. The abrasive composition, backing specification, joint and operating conditions are confirmed for each ordered configuration.
The working face uses an array of abrasive structures for finishing operations. Select the grade through workpiece testing.
The backing supports the abrasive layer while the belt travels around the machine wheels.
The closed-loop construction supports machine sanding and finishing.
Construction schematic · Color and configuration follow the approved specification.
Grades can be selected around the incoming scratch pattern and the following finishing operation.
Width and loop length can be specified for the customer’s equipment.
Product identification can be configured for distributor ranges and customer branding.
| Application | Operation | Evaluation Focus |
|---|---|---|
| Stainless steel components | Scratch refinement and preparation before polishing | Scratch pattern, heat and surface appearance |
| Steel hardware | Surface refinement after preceding grinding steps | Material removal, cycle time and remaining scratches |
| Metal housings and trim | Surface texture adjustment | Appearance and edge retention |
| Tubes and bars | Surface finishing on matching equipment | Contact arrangement, feed and finish |
| Parts awaiting buffing | Refinement of the incoming surface | Subsequent buffing time and acceptance results |
Application suitability depends on the abrasive mineral, grade, backing, joint and machine settings. Confirm the configuration on the intended workpiece before volume use.
Aozhong’s manufacturing offer supports configuration of abrasive belts for distributor product ranges and industrial purchasing programs.
| Customization | Buyer Input |
|---|---|
| Grit | Current abrasive grade, incoming scratches and target finish |
| Dimensions | Required width, loop length, tolerances and machine information |
| Color | Color reference and identification requirements |
| Logo | Artwork, marking position and identification requirements |
For repeat orders, establish a specification covering the abrasive, grade, backing, joint, dimensions and marking. Use the approved sample and agreed acceptance criteria as the purchasing reference.
Provide the required belt width and loop length, machine model, tensioning range and wheel arrangement. The 50 × 2100 mm designation identifies width and circumference; equipment compatibility also depends on the backing, joint and operating requirements.
Test the configuration on the intended workpiece using recorded machine settings. Agree on surface appearance, processing time, belt consumption and joint performance before using the sample as an order reference.
Record the approved abrasive, grit system, backing, joint, dimensions, color and logo requirements in the order specification. Agree on inspection criteria and how configuration changes will be handled before production.
No. Surface roughness also depends on the workpiece, incoming scratches, contact arrangement, speed, pressure and belt condition. Confirm the result through testing and define the measurement method where roughness is an acceptance requirement.
Logo, color, grit and dimensions can be customized. Provide artwork and product requirements for confirmation. Abrasive composition, grade availability, tolerances, order quantity and delivery schedule are confirmed during quotation.